Outdoor advertising machines can be customized to deliver content. Aiming at the target audience, every outdoor LCD advertising machine's delivery method can stimulate the effect of actively selecting media and interactive advertising experience. Durable outdoor advertising machines, of course, require routine maintenance Check.
Μηχανή εξωτερικής διαφήμισης
One, chassis assembly process
1. The outdoor advertising player must look at the case first, because it is placed outdoors, so IP65 is an international standard. Generally check that the welding glass glue in the shell is an even number, whether it is dew in the outdoor welding.
2. Check the mounting bracket and whether the nut fits closely with the frame body. Compared with mounting holes, it can be fixedly placed.
3. Fix the nut on the chassis of the outdoor advertising player. Carefully check the gap between the screw hole and the glass glue coating.
4. Observe the cleanliness of the surface of the machine and check whether there is dust inside the glass. Touch the inside of the glass to see if it is squashed. Use universal gravitation to see if there are blisters or bubbles. If there are, the touch will definitely fail.
5. Open the door frame of the outdoor advertising machine and try to close the door with one hand. When the door panel is in contact with the laminate, the door panel cannot be closed forcefully, indicating that the design of the door frame of the outdoor advertising machine does not meet the anti-theft standards. One is that the door structure is not good, and the other is that the lock is not good.
6. The machine box depends on the noise of the machine when it is running, and depends on whether the body's insulation wool is insulated. If the air conditioner is noisy and the insulation wool has no reflection, first consider the air conditioner's heat dissipation structure.
2. Outdoor advertising machine screen inspection standards
1. Wipe as usual, spread a dust-free cloth around the glass to see if there is water around the glass. If there are water droplets in the screw holes, fill them with glass glue.
2. Measure the distance between the inside of the glass and the LCD screen with a caliper. If the rubber strip is larger than 1mm, please pay attention to the air-cooled structure design.
3. Observe the internal board of the LCD screen to see if the circuit is clear and if there is no dust and stains on the surface of the LCD screen.
4. Carefully observe the layering and support frame of the LCD screen, and check whether the LCD screen is placed correctly according to the direction indicated by the backlight.
5. Look at the fan, insulating cotton, and protective net to see if the manufacturer is a real manufacturer.
6. Check the drive components such as the drive board, decoder board, terminal block, power supply, etc., and analyze according to the (electronic configuration table) standard.
