For today's advertisers, building advertising machines are an indispensable topic. Building advertising machines are used as a means of communication for advertising machines. There are several types of building advertising machines, such as vertical building advertising machines, wall-mounted building advertising machines, and hanging building advertising machines. Advertising machine, vertical building advertising machine is the simplest, it can be placed directly in the living room and lobby where needed, while the wall-mounted building advertising machine needs to be more firmly installed on the wall, so that the wall-mounted building advertising machine can be better installed. on the wall. It involves the installation environment, installation location, bracket, load-bearing wall and other issues, so it is necessary to install the wall-mounted advertising machine. When installing a wall-mounted advertising machine, you must master the installation skills to ensure its normal use.
Wall-mounted building advertising machine
Many businesses do not know how to install the wall-mounted advertising machine. In fact, the machine is packaged with an installation manual. Next, the technician from Rongda Caijing will introduce the detailed installation steps of the wall-mounted building advertising machine.
1. Take out the packaging of the building advertising machine, and take out the protective bag and all accessories outside the packaging for spare.
2. Lay the building advertising machine flat on the outer packaging of the machine itself to prevent collision or friction.
3. Open the whole door with the safety key on the building advertising machine on the wall.
4. After opening the safety door, use a screwdriver to remove the safety inner screw of the building advertising machine bracket, and then remove the wall-mounted backplane.
5. Connect the WiFi antenna to the WiFi network for installation, and support the RJ45 network.
6. Determine the position where the building advertising machine is hung, whether the wall is a solid wall, determine the weight of the building advertising machine on the wall, and then determine the position of the installation board hole, mark it with a marker, drill the hole with an electric drill, and use expansion screws to drill. The entrance of the hole is knocked and fixed, and finally the back panel of the building advertising machine is installed.
7. Two people lift the machine to the position where the back plate is fixed, and fix it in the fixed card slot of the fuselage. Remember to lock the mounting screws on the inside of the safety door to prevent free movement of the machine.
8. Finally, confirm the power cord, whether the socket is the same line as other high-power electrical equipment, insert the power cord into the plug board, turn on the power switch, and supply power to the machine.
9. Power on, remember to connect to the network WIFI or network cable to play.
